This clinical tip will show you how to place the McDonald Matrix Band in three manageable steps. You will see how to stabilise the band while placing, which makes it easier to tighten the matrix band and to achieve the correct vertical height.
Step 1:
Place the distal side of the matrix band into the gingival crevice first and secure it with a wooden wedge.
Step 2:
Since the matrix band is now trapped in place by the wedge, you can now manipulate the mesial side of matrix band into place and use another wooden wedge to secure that side. Ensure that the bevel on the top edge of the band is slightly above the marginal ridge of the neighbouring tooth.
Step 3:
The matrix band is now held in place by itself. You are now able to use both hands to tighten the matrix band. There are a few ways to do this.
- Using a finger to press the orange toggle against the tooth while tightening.
- Hold the orange toggle in place with tweezers or forceps while tightening.
Ensure that the matrix band is tight.
Tooth Separation
When it comes to separation, some dentists prefer to push hard on the wooden wedges twice with a few minutes in-between to give maximum separation. Dr Adam Doudney likes to use the wooden wedges together with an original Garrison Composi-Tight separating ring (click here to learn more about this method). Whichever method you choose is up to you.
If you are still struggling after trying this method, you may wish to try building the tooth up so there is more substance for the band to grip on to. Let us know how you go!
View the short video below to see it in action.